|
|
 |
There are three basic methods for getting a dechlorination chemical into water. Click here for an overview of these methods.
For further information or assistance in purchasing any of these diffuser devices, simply contact Integra Chemical Company at 800.322.6646.
Equipment - VITA-D-CHLOR & VITA-D-CHLOR Neutral
| |
deChlorinator
The Transmate DeChlorinator dechlorinates under the broadest range of conditions. The design allows for both long slow flushes of potable water and high volume treatment of superchlorinated lines as well as most variations in between.
Additionally, it can be accurately adjusted to efficiently treat less than 1 PPM chlorine to hundreds of PPM chlorine. When using Vita-D-Chlor Neutral there is never a negative impact to either the pH or the turbidity, even when treating high chlorine levels.
View the product brochure
View product instructions
|
|
|
Equipment - VITA-D-CHLOR Tablets
| |
LPD-250 & NEW Lightweight Aluminum LPD-250
Tablet dechlorination has been available for a number of years and the LPD-250 is a leader for its economical and easy to use application. Simply insert tablets and open the hydrant for fast, easy and reliable dechlorination.
These units are also now available in aluminum. At 17lbs, it weighs nearly half the weight of the original and provides for less stress when attached to a hydrant.
View the product brochure
View product instructions
|
|
|
Dechlor Demon (Hose Monster)
The Dechlor Demon neutralizes the chlorine in water during fire flow testing, hydrant flushing or flushing of superchlorinated mains without affecting test results or adding stress to hydrant nozzles.
This low restrictive device uses tablets and allows adjustment of the amount of dechlorination chemical, limiting the potential for severe over dechlorination. Available sizes include 2 ½", 4" and 4 ½".
View the product brochure
View product instructions
|
|
|
Bazooka
|
|
Vita-D-Chlor Taby Mat & Sock
The Taby Mat and Sock provide for fast, simple-to-use and inexpensive methods of dechlorination. This starter method of dechlorination can be used when better methods are not available.
These pieces of equipment combined with Vita-D-Chlor tablets provide a safer alternative to many other field dechlorination methods and chemicals. They can be used only for treatment of potable water with low levels of chlorine.
View the product brochure
View product instructions
|
|
|
Equipment - Dechlor Chlorine Test Strips
| |
5-Way Test Strips
5-Way test strips report results for Free Chlorine, Total Chlorine, pH, Total Alkalinity & total Harness – all on the same strip. Utilizing a single dip-and-read method, these strips offer accurate and reliable results in less than 30 seconds. 5-Way Test Strips are available in bottles of 50.
Sensitivity; Free and Total Chlorine;
0, 0.5, 1, 2, 4 & 10 ppm (mg/L)
pH; 6.2, 6.8, 7.2, 7.8, 8.4
Total Hardness; 0, 25, 50,120,250, 425 ppm
Total Alkalinity; 0, 40, 80, 120, 180 & 240 ppm
|
|
|
Free Chlorine Water Check Test Strips
Free Chlorine test strips combine a wide range of detection with a patented Free Chlorine indicator. Free Chlorine is perfect for determining whether or not you have the correct amount of sanitizer present and for determination of the correct amount of Vita-D-Chlor necessary for dechlorination of potable and mildly chlorinated water. Available in bottles of 50, all of the reagents are impregnated on to the test strip pad and no external chemicals are needed to perform the test. Available in ranges of 0-6 ppm (mg/L) for high accuracy and 0-25 ppm (mg/L) for broader range testing.
High Sensitivity; 0, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8, 1.2, 1.5, 2, 2.6, 4 & 6 ppm (mg/L)
Broad Sensitivity; 0, 0.25, 0.5, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 15, 20 & 25 ppm (mg/L)
|
|
High and Ultra-High Free Chlorine Water Check Test Strips
High and Ultra-High Free Chlorine test strips have higher ranges of detection with a patented Free Chlorine indicator. High and Ultra-High Free Chlorine are perfect to determine whether or not the correct amount of sanitizer is present and for determination of the correct amount of Vita-D-Chlor necessary for dechlorination of super chlorinated water. Available in bottles of 50, all of the reagents are impregnated on to the test strip pad and no external chemicals are needed to perform the test. Available as High for 0-120 ppm and Ultra-High for 0-750 ppm (mg/L).
High Sensitivity; 1, 5, 10, 20, 40, 80 & 120 ppm (mg/L)
Ultra-High Sensitivity; 0, 25, 50, 100, 200, 300, 400, 500 & 750 ppm (mg/L)
|
|
|
|
FAQs